Blade Stop & Brakes
Enables on-demand stoppages and starts of production flow.
Lift & Transfers
(LAT) Lift-and-Transfer devices are used to provide a smooth and accurate product transfer at a right angle (90 degree) to the original transport direction.
Lift & Rotate
(LAR) Lift-and-Rotate devices, Side Transfers and Turntables are used to change the orientation of products on the Slip-Torque® conveyor.
Multilane Accumulation
Adjacent lanes on the conveyor surface run in opposite directions while still being driven off the same line shaft also allowing accumulation of product on the roller surface.
Positioners
Product positioners accurately position products for a particular process.
Pushers
Product Pushers are used to push product perpendicularly from one conveyor traffic lane to another traveling in the same or the opposite direction, into or out of operator workstations or off of the conveyor system completely.
Single Row Combiners
Combining lanes into one single row
Speed Changes
Specific spacing of products
Stacking Devices
Surface Hole
Roller surface to enable various operations initiating below the conveyor surface to take place through the conveyor surface
Products
- Slip-Torque®
- Low Profile™ Conveyors
- Heavy Duty Conveyors
- SmartFeed® Conveyor
- Diverters (Swingers)
- Vertical Conveyors
- Easy Clean™ Conveyor
- Lift Gates
- 30 Degree Twist Conveyors
- Slip-Trak® Conveyor
- Zone Control® Conveyors
- Clean Passage™ Conveyor
- Corners
- Standard Options
- Custom Devices
- Special Applications
- Special Surfaces
- Controls
- Chain Drive